You can make a real difference during planting if you can pay attention to your planter:
SeedSense makes it happen.

With its color-coded, touchscreen display, you’ll spot any errors in down force, spacing and singulation immediately. You’ll zero in on the source. You’ll check it out. You’ll fix it. And you’ll move on, confident that you’re doing everything you can to plant profitably.

More precise than any other monitor, SeedSense tells you what you need to know about population, skips, doubles, speed, row unit ride, down force and ground contact. It enables you to seed precisely, maintain depth, avoid compaction and troubleshoot mechanical problems.

SeedSense is easy to use, too. The main screen summarizes everything. The most important metrics are the largest. Green means go, yellow means caution, red means stop and fix whatever’s wrong. Just tap the screen and you’ll see row-by-row details, so you know where to look.

Control Is Knowledge & Execution

Knowing what your planter is actually doing is the only way to make your best planting run. Once you know what is required for the best pass, can you execute it? The right information and tools make all the difference.

Mendell Elson, Miami, MO

“[20/20 SeedSense] is the backbone of the system, providing the information at a glance, with touch screen simplicity ... it lets you know by both visual and color prompts what’s going on and what amount of attention needs to be addressed to a potential issue before it becomes a problem.”

SeedSense is the central hub of your data.

You have your eyes on everything you can see in your planter’s performance. SeedSense unveils even more that you normally couldn’t see, and best of all, it’s accurate. So accurate that you’ll see just how much sense SeedSense can make in your operation.   Start with SeedSense. End with the best decisions & yield.

 

20/20 SeedSense capabilities, and results in the field.

planter performance, unveiled

SeedSense takes the blindfold off, so you see what you’re really planting for results.

Easy to navigate, easy to see results.

SeedSense has everything you’d want to know about your planter’s performance on screen, and it’s easy to navigate with intuitive touch points.

Find hidden mechanical problems and correct them at planting. Perfect your planter performance by adjusting meters, vacuum pressure, transmissions and speed. Improve productivity and measure and adjust down force.

Pair with FieldView to take information from your SeedSense and conveys it through instant, high-definition maps. It just makes sense.

 

Are You Really In Control Of Your Planter?

Know what your planter is doing and
take control of its operation.   Base future purchase decisions on facts,
not guesses or estimates.

Singulation

See the percentage of skips and multiples for the entire planter and each individual row. 95% singulation isn’t good enough.

Down Force

Watch ground contact to be sure you’re planting at full depth and monitor excess weight that leads to compaction — which leads to lost potential.

Good Spacing

This is the percentage of seed spaced within the limits you set. Picket row fence, here you come.

Hex Shaft

Is your ground drive transmission slipping? One glance tells you.

Loss / Acre

See relative yield loss from the combined errors. If it says “Good”, you’re good.

Good Ride

Row Unit Ride reports bounce & vibration of the row unit, letting you know if you need to slow down.

A Lot More

SeedSense is this and so much more. For complete details, contact your local Precision Planting Dealer or drop a line.

GET A DEMO

Your dealer can show you SeedSense hands on and in detail

SeedSense Has A Brother

They grew up together! So you can bring your field to life, in real time, on high-resolution maps — with FieldView. SeedSense & FieldView provide the perfect pairing to bring all the data you trust anywhere you go, on your iPad tablet. Family reunions will never be the same.

Learn About FieldView
 

PrecisionAcre

You want to save money. You want to maximize yield. PrecisionAcre is the answer — click below for details on packages and pricing.

View Offers
 

20/20 SeedSense Support Resources


Software Updates

To update your 20/20 display software for planting, click the appropriate link below for either Gen 1 or Gen 2 display models. Gen 1 models have two USB ports on the side. Gen 2 models have 1 USB port on the side and 3 on the back. Save the file to your USB drive making sure that you do not save it in a folder and that the file name is not altered. Insert the USB into the 20/20 and press SETUP, DATA, and SOFTWARE UPDATE.

+ Gen 1 - 20/20 SeedSense Software Release 08.04.04 09/19/14 + Gen 2 - 20/20 SeedSense Software Release 08.04.04 09/19/14

Boot Software

Boot software is used to recover a display that is frozen or locked up. To use this software, click the link below for either Gen 1 or Gen 2 display software. Save the file to a USB drive and then insert it into a fully powered down 20/20 display. Then turn the power on. The software will load as the display boots up.

+ Gen1 – 20/20 SeedSense Software Boot Version 09/19/14 + Gen2 – 20/20 SeedSense Software Boot Version 09/19/14

Data Upload

Click the link below to upload your as planted data to Precision Planting for analysis. FieldView also allows you to upload data directly from your iPad in the cab. To use Data Upload, save your data in a compressed file with a .zip format, enter the requested information, and click SUBMIT.

+ 20/20 Field Map Data Upload

20/20 PC Demo & Setup Tool

The 20/20 PC Demo & Setup Tool allows you to run 20/20 display software on your computer. Use it to explore the features and functions of the system and learn how to navigate the screens before you get to the field. You may also create your clients, farms, and fields in the PC demo and export them to a USB drive for transfer to the 20/20.

+ PC Demo Tool – Version 8.00 + PC Demo Tool Instructions

Mapping Software

Field Map data from your 20/20 display can be viewed in a variety of desktop mapping software applications. At present, SST Summit, AgLeader SMS, Farm Works, and MapShots software programs are able to read and display maps from 20/20 data. Two free viewing programs are available below.

MapShots Field Operation Viewer

+ FODD Windows Driver for 20/20 + MapShots Field Operations Viewer

Farm Works View

For assistance with Farm Works View, please contact Farm Works support at 800-282-4103 or farmwork@farmworks.com.

+ Farm Works View