eFlow Seed Lubricant
eFlow™ Seed Lubricant
This special blend of talc and graphite improves seed loading and seed release – and that improves seed spacing. eFlow improves the flow of seed from the hopper to the meter. In the meter, eFlow ensures that seeds release consistently once the vac is shut off and seeds drop to the seed tube. The addition of graphite, especially in smaller seeds, helps seeds slide off the disk like clockwork.
Just mix ¼ cup of eFlow per 80,000 seeds. On large seeds, 60# or more per 80,000 seeds, reduce the rate to 1/8 cup.
eFlow is available in a convenient 8# jug. That’s enough to lubricate 130 units of seed corn. We’ve also developed a clean and convenient measuring lid that fits the eFlow jug. The lid meters 1/8 cup of eFlow with each turn of a handle – two turns equals ¼ cup delivered directly into the hopper. Treated seeds with a rough coating may need more eFlow.
Don’t exceed the recommended amounts. Too much talc can inhibit seed flow – especially in high humidity. Watch for talc or eFlow accumulations at the bottom of the seed hopper or meter.
| Seed Units | 130 | 260 | 390 | 520 | 650 | 780 | 910 |
|---|---|---|---|---|---|---|---|
| Jugs | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
Precision Planting Powder Graphite
For all finger meters and CNH air planters, this premium graphite extends wear life and improves meter performance. Graphite provides the lubrication needed to prevent wear on meter components. It also improves seed flow and can improve meter performance. But, as with most things, a little is good , but a little more can be bad. A tablespoon per bag (80,000 seeds per unit) is recommended. With heavy seed treatments, increase to 2 tablespoons. It is important that new meters, or meters that have been cleaned, get a good, early dose of graphite to prevent seed treatment from sticking to bare metal. Mix the graphite into the seed to prevent uneven settling.